Multi Display - pH Controller & Display

Product series: HBMD-PH

The Multi Display is available in two versions used for displaying the pH value or level display. The sensor is identical for the two applications except for a setting in the software. The difference is in the scope of supply. 

HBMD-PH is a display box for showing the pH value directly, when connected with the HBPH sensor. It is possible to do the calibration in the display box and send the pH value on as a linear analog output to a PLC.

The sensor is supplied with a M12 female connector used for connecting the pH sensor and a 5 m M12 supply cable.




Product features

Display the pH value directly
Suitable for calibration of the pH sensor
24 V AC/DC power supply via M12 plug
Can be installed directly on a wall

Applications

 

 

 

 

Specifications

Connection diagram

 CONNECTION DIAGRAM HBMD PH

Drawing

HBMD Komp R1 300ppi Medium

 

 

Power supply
Voltage24 V AC/DC ± 10 %
Frequency50/60 Hz
Current consumptionMax 40 mA
ConnectionPlug
Wire size<2,5 mm2
Input
Analog input - sensor4-20 mA
Output
Analog out4-20 mA
Load3A/24 VDC
Relay ouput@24VAC & DC: 3 x 3A @110 VAC. 3 x 5A @240 VAC: 3 x 5A
Environmental conditions
Surrounding temperature-40...+70 °C
Protection classIP65
Relative humidity20...80 %
Mechanical specifications
MountingWall mounting
External measurement100x81x40 mm (WxHxD)
Cut-out measurementN/A
MaterialPlastic
Weight0.3 kg
Approvals
EMC EmissionEN61000-3-2
EMC ImmunityEN61000-4-2
Display
Digit's display3 digits, red
Alarm indicationN/A
ProgrammingHB Tool
Updating1 time each second

Ordering code

House designOrdering code
pH Controller & DisplayHBMD-PH

Downloads

Skriv dig op til vores nyhedsbrev

Hold dig opdateret omkring produkter, nyheder og viden om sensorer til køleanlæg og varmepumper.

Invalid Input

Invalid Input

Invalid Input