The HBX Vapor Quality Sensor has a revolutionary patented technology and it is the first sensor in the world capable of measuring the relationship between vapor and liquid in a refrigeration system.
In this video, our Product Manager Henrik Kudsk will explain the design and basic functions of the Vapor Quality sensor types: the Rod style, and Strainer house.
In this video, our Product Manager Henrik Kudsk explains the functionality of our defrost sensor that is used for measuring the frost layers on an evaporator.
In this Vapor Quality video, Director Michael Elstrøm will demonstrate The Duke, with the Inline and Strainer house Vapor Quality sensor types - and the new Flow Sensor, as part of the demonstration.
This video is a follow-up to the previous Vapor Quality video - This time Henrik will explain how the Vapor Quality Strainer house works on a DX Ammonia system.
A collaborative video on HBLC-CO2 featuring Christof Fischer, Germany. This sensor is designed for the measurement of CO2, Butane or Propane refrigerant level in chillers, evaporators and condensers.
The sensor helps you achieve higher control of the defrosting process and reduce the number of defrost cycles by 50%. In a DX system, the superheat reduces frost formation on the evaporator surface; however, the ice will instead accumulate at the center of the evaporator. To get the best results and performance from the sensor, install the wire across the air inlet to the air outlet...
HBLT-Wire is a capacitive wire sensor for liquid level measurement. The sensor is typically used in industrial refrigeration systems and other industrial applications.
Our Defrost sensor optimizes the defrosting process by starting automatically before the frost layer between the fins reduces the evaporator efficiency. You can typically experience a 50% reduction of defrost cycles compared to traditional timer-based defrosting...
Wouldn’t you appreciate only having to defrost when it’s necessary? With Demand Defrost, you can typically cut the number of defrost cycles by 50% and experience substantial energy savings.
A thick frost layer will decrease the efficiency of an air-cooled evaporator – our defrost ice sensor can control the frost layer better than a standard timer-based defrost system...
Watch Michael Elstrøm giving our latest update on Low Charge Ammonia systems designed as Direct Expansion.
Watch our Product Manager Henrik Kudsk give a webinar on Vapor Quality.
In our newly updated factory tour, we will take you behind the scenes of our headquarters, introducing you to the different departments that each contribute to the success of HB Products – From research & development to production to product management and sales.
Come along on our product development journey, from R&D through testing to production.
As part of their #GOTAMINUTE series, Jyske Bank visited HB Products and interviewed Michael Elstrøm.
We are currently in the middle of a great expansion of our facility building. We are adding a second storey of 680 m2. Watch the exiting transformation.
Monday to Friday:
Sales & Marketing: 09:00 - 15:00
Purchase & Logistics: 08:00 - 14:00
Support: 08:00 - 15:00
Finance: 09:00 - 14:00
Delivery of goods: 08:00 - 15:00
We are closed on the following public holidays:
Christmas | December 24 through January 1* |
Easter | Maundy Thursday, Good Friday, Easter Monday |
Great Prayer Day | May 5 |
Ascension Day | May 18, May 19 |
Whit Monday | May 29 |
Constitution Day | June 5 |
*Production is closed during this period, but we have individual phones open for service and technical support.
25-years of experience in the industry, progressed us to become specialist in innovation and development of high-quality sensor technology. Sensors made in robust materials to endure extreme temperatures and provide longevity as the need of replacement is less frequent. We make sure to meet laws and regulations, which may vary depending on the international location. As well as conducting yearly SO:9001 Quality Assurance, a process to document and verify our quality, to continue in meeting or exceed the quality requirements of the refrigeration and heat pump industry.
Read more below
|
ISO 9001:2015 Since 2004, we have been certified due to ISO 9001 (previously 9001:2008). This certification demonstrates our serious approach towards the products we develop, produce and sell. |
ATEX, Liquid Level Sensor, zone 0, HBCS-EX01-X ” II 1 G Ex ia IIC T6….T1 Ga” ATEX, positions sensor, zone 1, Long & Shortstroke ”II 2 G Ex ib IIC T5/T6 Gb” |
|
cULus Protection Class: Class l, Division 2 Group ABCD Hazardous | |
IECEx, Liquid Level Sensor, zone 0, HBCS-EX01-X ” Ex ia IIC T6….T1 Ga” IECEx, positions sensor, zone 1, Long & Shortstroke ”Ex ib IIC T5/T6 Gb” |
|
Quality management system certified for ATEX PQAN and IECEx QAR |
General information about HB Products:
Address:
HB Products A/S
Bøgekildevej 21 DK 8361 Hasselager
Denmark
Web: www.hbproducts.dk
E-mail: info@hbproducts.dk
Tel: +45 8747 6200
Bank Jyske Bank A/S Vestergade 8-16 DK 8600 Silkeborg Denmark
Registry office Aarhus, Denmark VAT (CVR) number: DK-2669 3934
IBAN No (EURO): DK 5450 61000 1064549
IBAN No (DKK): DK 7750 61000 1064523
Swift Code: JYBADKKK
Conditions for using our website
This website is created for the purpose of providing information about the products and competences of HB Products. At all times, we strive to provide information that is entirely correct, but we cannot exclude the possibility of mistakes in the information provided.
The links that we provide to other websites should be regarded as a service. We cannot be held responsible for the content of these other sites.
The content of this website belongs to HB Products A/S. It is legal for you to download text and images from this website, but the downloaded material may under no circumstances be reproduced anywhere else in any form – whether edited or otherwise.
This website contains a number of logos and names which are used as trademarks – many of them are registered as such and are therefore protected by law against illegal use. It is not permitted to use these trademarks without obtaining prior written consent from the owners.
Any enquiry to HB Products A/S through this website is treated with the highest level of confidentiality – and information about the website's users is never shared.
HB Products is a Danish company, which specializes in the development and production of sensors for industrial and commercial refrigeration as well as for heat-pump systems. At HB Products we are dedicated to supply optimal solutions for energy efficient evaporator control, level control and oil management. HB Products are known for being at the forefront of using new technologies and supply products of tomorrow already today.
Apart from expertise within oil and refrigerant control, we have great know-how in the design and optimization of industrial- and commercial refrigeration systems. This knowledge enables us to develop and produce high quality and durable products.
Since its start more than 25 years ago, HB Products has attained a strong global position with distributors in more than 60 countries. Our customers vary from World leading OEMs to small contractors.
Development & construction: HB Products works continuously with the development and design of new products – in new materials and with new functionality. By using the newest construction tools, the ideas are transformed into specifications and pictures, which are subsequently used in production. |
|
Technology and craftsmanship: HB Products is responsible for the production of sensors and control modules. In manufacturing, we take a craftsman's approach to our work, but in many areas of production we use modern and highly efficient manufacturing technology. This ensures quality down to the smallest detail. State-of-the-art electronics manufacturers |
|
Test and quality control: All newly developed products go through rigorous testing procedures and extensive quality control before they are cleared to be put on sale. | |
Calibration: In order to guarantee products with precise functionality and the best measuring capabilities, each product is calibrated before it is sent to general quality control. |