Oil Ejector

Technical data: HBEJ-MK2

HBEJ-MK2 is an oil ejector for automatic oil drainage for industrial ammonia refrigeration systems. The ejector is used together with an HBOR oil pot controller and 2 magnetic valves. The ejector uses hot gas as propellant and is designed for a hot gas pressure of max 120 bar. The ejector is made in stainless steel and has compression fittings as well as a thread connection.
The ejector is a simple economical solution for transporting oil from point A to point B without worn parts and with a low energy consumption.

HBEJ oil return ejector could be used on CO2 system to return the collected oil / refrigerant mixture from the evaporator to the suction line on flooded systems.

The ejector will empty 0,05 l/minute minimum.

Shop image

Product features

  Ejects 0.05 litres of oil per minute.
Compression fitting design for easy installation – Oil in: Ø10 mm / Oil out: Ø10 mm.
No movable parts – limited servicing



System design (NH3-system)





Environmental conditions
Ambient temperature-30°C...+50°C
Liquid/hot-gas temperature-60°C...+150°C 
Max pressureMax 120 bar
Mechanical specifications
Hot gas connection3/8” BSPP
Oil return line10 mm
Oil inlet10 mm
Material, mechanicalAISI304

Ordering code

Oil capacityConnectionOrdering code
Oil ejector (0,05 l/m)3/8” BSPP / Ø10 / Ø10HBEJ-0.05-G3/8-MK2


Sign up to our newsletter

We will keep you up to date on products, news and knowledge about sensors for refrigeration systems and heat pumps.

Invalid Input

Invalid Input

Invalid Input