NH3/Brine Leakage Sensor

Technical data: HBPH-MK2

HBPH-MK2 is a pH sensor designed for the extreme requirements of industrial refrigeration. It is used to measure the pH value of brine in case of an ammonia leak in a heat exchanger. Brine has a pH value of 7, and even for small leaks, the pH will rise to 9-10. The sensor is designed with differential measurement technology that ensures a minimum lifetime of 2 years for the sensor element.

The latest version HBPH-MK2 has an improved and protected universal flat-faced glass process electrode specially designed for tough applications.

The HBPH-MK2 -sensor can be used together with our “NH3/Brine leakage Display” type HBPH-C1 which is a controller used to calibrate and set up the alarm limit for the HBPH-MK2 sensor.

HBPH-C1 can be found here.

Product features

  Simple wiring with 2-wire measurement technology.
Measurement range: 0..14 pH - 4...20 mA.
Accurate measurement - Resolution +/-0.01Ph
Differential measurement technology with replaceable salt bridge.

Low maintenance costs.

Designed with "Semi-flush" design so as to minimise the build-up of dirt on the probe.

Applications

chiller med pH sensor web.jpg

HBPH 2W 9 MK2 COLD LIQUID APPLICATIONS

Specifications

Connection diagram

HBPH 

Drawing

HBPH 2W 9 MK2 MECHANICAL DIMENSIONS 
Factory Calibration:

A standard factory calibration would guaranty the accuracy of 88% or better (usually in mid 90's) and the offset of 0.85pH of fewer for a brand new sensor. 

Using 4mA = 0pH and 20mA = 14pH, the worst case scenario (88% accuracy and max allowed offset) may equate to roughly speaking ±1.0 pH assuming no calibration is done at the installation site.

In case the above mentioned accuracy is not enough use an external controller or a PLC to calibrate the signal. Calibration is carried out with buffer solution pH 4 and pH10 as 2 point calibration.

 

Power supply
Cable4.5 m
Power supply20...28 V DC
Analogue output4...20 mA
Connection2-wire
Max load450 ohm
Max cable lengthDepends on cable size
Environmental conditions
Ambient temperature-10...+50°C
Measurement area0...14 pH
Resolution±0.01 pH
Liquid temperature-10...+95°C (+14...+203℉)*
Max pressure6.9 / 2.8 barg (+65/+95°C)
Protection degreeIP65
Max liquid speed3 m/s
VibrationsIEC 68-2-6 (4g)
Mechanical specifications
Thread connection1" NPT
MaterialCPVC, Kynar, Glass & EPDM
Approvals
EMC testEN 61000-2
Accessories
3-pack salt bridge replacement kit HBPH-2W-9-MK2-KIT
Controller for pH Sensor HBPH-C1
Controller for pH Sensor HBPH-C1-ENC

Ordering code

Measurement area pHThread typeOrdering code
0...141" NPTHBPH-2W-9-MK2
Accessories

3-pack salt bridge replacement kitHBPH-2W-9-MK2-KIT
Controller for pH SensorHBPH-C1
Controller for pH SensorHBPH-C1-ENC

Downloads

Sign up to our newsletter

We will keep you up to date on products, news and knowledge about sensors for refrigeration systems and heat pumps.

Invalid Input

Invalid Input