Low Temperature Oil Level Switch 90 - 240 V AC

Technical data: HBSO-SSR-2-LT

HBSO-SSR-2-LT is a low temperature level switch used for detecting common lubricating oils in refrigeration systems. The switch is special developed for low temperature applications.

The HBSO version of the low temperature oil switch can be used for all types PAO, POE, mineral oil and PAG oil.

 Typically it is installed in / on the compressor and the oil separator, but it is also suited for installation in other locations in the oil system. The sensor’s measurement principle makes it unique for these purposes, since the properties of the measurement

principle allows it, among other things, to detect oil without detecting refrigerant.

 It is calibrated so that it is unaffected by oil spray and only allows a small amount of foam.

The electronic sensor head is the same as the one used for the regular HBSO1 and HBSO2 sensors. The mechanical part has got a special open design made for draining the stiff and sticky oil at low temperatures on the low pressure side of a cooling plant.

 

Product features

The switch is special developed for low temperature applications
Oil temperature range -30°...+80°C
The mechanical part is made with a special open design for draining the stiff & sticky oil at low temperatures
With solid state relay output NO/NC contact function
Split design which makes it easy to install and diagnostic. The electronic part can easily be disassembled by 2 screws.
Designed for the industrial refrigeration industry - max pressure up to 150 bar
Universal power supply 90 - 240 V AC
Clear LED indication

Specifications

Connection diagram

 

 

 HBSO SSR 2 LT ELECTRICAL INSTALLATIONS

 

Drawing

 

 HBSO SSR 2 LT MECHANICAL DIMENSIONS

 
Power supply
Voltage90 -240 V AC
Max current outputMax 50 mA
Plug connectionM12 – DIN 0627
Output
Solid state relay output90-240 V AC-40W
Contact functionNC or NO
Environmental conditions
Ambient temperature-30°...+50°C
Oil temperature-30°...+80°C
Max pressure150 bar
Protection degreeIP65
VibrationsIEC 68-2-6 (4g)
Mechanical specifications
Thread connection3/4” NPT & 3/4" BSPP
Material (liquid parts)AISI 304 / PTFE
Material (electronic parts)Nylon 6 (PA)
Outside dimensions278 x 51 x 72 mm
Weight605 g
House designFront
Approvals
EMC testEN 61000-2
Indication
LED indication3 x green, 1 x yellow and 1 x green

Ordering code

OutputThread typeOrdering code
NO3/4" NPTHBSO-SSR-2/NO-2-LT
NC3/4" NPTHBSO-SSR-2/NC-2-LT
NO3/4" BSPPHBSO-SSR-2/NO-6-LT
NC3/4" BSPPHBSO-SSR-2/NC-6-LT

Downloads