Defrost On Demand Sensor for evaporator
in Cold Room or Heat Pump - 30 m wire
Incl. temp. sensor for defrost stop
Itemnumber: HBDF-MK2-30-OD
in Cold Room or Heat Pump - 30 m wire
Incl. temp. sensor for defrost stop
Itemnumber: HBDF-MK2-30-OD
To view our prices you must be logged in. Please log in or contact info@hbproducts.dk.
You can still collect items in your basket and send a request.
Ambient temperature: -60 to 20
Protection class: IP65
Cable entry: PG9/M12
Analog output 4-20 mA
It may be affected by rain, snow, or other forms of moisture on the evaporator surface. Given these environmental influences, the sensor serves best as an assistant or guide for a controller rather than as a sole defrosting solution.
The HBDF is a sensor designed for evaporators with at least 5 mm fin spacing, operating in cold rooms.
It is intended for indoor use and is not suitable for wet or outdoor environments. The sensor integrates a temperature sensor for compensation
- Smart defrosting: Stops defrost when the ice is melted, thanks to input from a temperature sensor located on the evaporator surface.
- Simple installation: The sensor can be easily installed, even in existing sites.
- Energy efficiency: More efficient than timer-based defrosting, saving energy and costs.
Check the document library
Looking for more in depth information?
Please go to our document library, where you can find updated data sheets, instruction manuals, quick guides and much more.
Product specs at a glance
| IP Class | IP65 |
| Power Supply | 24V AC/DC |
| Ex/ATEX approved | No |
